FPV – The Lumenier QAV250 Mini Quadcopter – Built & Tested

At Droneheadz we love flying drones recreationally, and there is no better adrenaline filled, immersive, out-of-body experience than FPV (First Person View).
We are in the process of starting an FPV club in Sydney, so in the meantime we want to spread the vibes by hooking you up with some quality gear to start racing.

We’ve selected what we feel is the most solid setup with a wicked frame and components from Lumenier, considered the benchmark for FPV racer quads, to get you up and running with the gear you need to kick your mates asses. Just add flying skills.

All built and tested and configured for peak performance. Saving you a good day of soldering and building and potentially longer getting your setup to work well. As some pilots have their own Transmitter(Tx), Receiver (Rx) and FPV gear, the base package is the drone only. You just add your own extras and you’re off. If you don’t have your own gear yet then we have all the options available to get you setup and completely ready to race. Just also select the bits you don’t have and we’ll build it for you. 

*Disclaimer: you need to be careful where you fly FPV, at present the laws in Australia are quite restrictive, please ask us if you need advice.


The Lumenier QAV250 Mini FPV Quadcopter airframe is a small agile FPV racer quad. The QAV250 is a symmetric 250mm size airframe that accommodates 5″ props. The 250mm is measured motor shaft to motor shaft diagonally.

Base Package Includes

  • Fully built and tested Lumenier QAV250
  • 1x Lumenier lipo battery strap
  • 8x Gemfan 5” Propellors –2 sets (Colors may vary)
  • 4x Lumenier FXC-1806 2300kv motors
  • 4x Lumenier 12 amp ESC w/ SimonK AutoShot (2-4s N-FET)
  • OpenPilot CC3D Flight Controller pre-programmed and test flown

Not Included

As most pilots use the same Transmitter across all their aircraft, this isnt included, however if you need a radio Tx/Rx we can quote you based on your budget and setup so you’re ready to fly.


No Fields Found.

Base price: $690 AU

Lead time is 1-2 weeks from payment of invoice to obtain parts, build and test.

Contact us to place an order
or make an enquiry